Egregoros

@skylar Electric or gas fueled? If electric its possible that one of the heating elements is bad/overload tripped.

スカイラー

@EdBoatConnoisseur@poa.st remote

@DemonSixOne gas
if it was electric i'd have molested the elements with the multimeter
but the fire seems happy inside its little fire window

EdBoatConnoisseur

@skylar @DemonSixOne the advantage of the electric shower head, you will always get hot water even if the mains are pumping water straight from alaska, safe and effective just remember to install it well grounded.

Radians

@EdBoatConnoisseur@poa.st remote

@EdBoatConnoisseur @skylar Brazil moment.

EdBoatConnoisseur

@DemonSixOne @skylar my shower is well grounded to the lead pipe.

スカイラー

@EdBoatConnoisseur @DemonSixOne inb4 it changes to PVC or CPVC an inch inside the wall

Radians

@skylar @EdBoatConnoisseur fun story about that, i had a ground impedance thing a while back and it turned out to be because someone had repaired a pinhole leak in some copper with pex A and sharkbites.

スカイラー

@DemonSixOne @EdBoatConnoisseur reasonable fix if you don't have a press tool and are deebly concerned about your skills with an open flame inside a wall or ceiling

i'm not sure sharkbites are even that bad, people just mash them onto fucked up pipes and destroy the o-rings

anime graf stancil 🛰️🪐

@skylar @DemonSixOne @EdBoatConnoisseur in the spring I'm going to take my outer door off and mating press some blind rivets into it because i had so many of these niggas at my house in the summer and fall they literally wore out the original mount for the pneumatic closer and it fell off entirely. I've fixed it temporarily but I'm going to replace the entire mech in the spring because it wasn't proper when I got here

Radians

@graf @skylar @EdBoatConnoisseur Rivnuts are the way to go on that and its what the manufacturer should have used in the first place but we all suffer from cheap niggerspic shit in residential construction.

スカイラー

@DemonSixOne @EdBoatConnoisseur @graf will rivnuts really help when the problem is the storm door is made of thin aluminum
maybe two of those into like a long ass 1/8" aluminum bar stock
but then regular rivets to the rest of the door

Radians

@skylar @EdBoatConnoisseur @graf it just needs two 5/16-18 UNC rivnuts, the only thing it has to hold is a closer spring that is mostly shear force.

anime graf stancil 🛰️🪐

@DemonSixOne @skylar @EdBoatConnoisseur It hasn't flexed with two standard nuts. We drove the one into it in the summer but I put a second one in when that broke out and it's sturdy for now

Radians

@graf @skylar @EdBoatConnoisseur i mean realistically the best would probably be just to through bolt it with some 316 stainless hardware.

anime graf stancil 🛰️🪐

@DemonSixOne @skylar @EdBoatConnoisseur oh I forgot to tell you, I have a full panel screen insert for it so next time you come I'll have that in the door so we can leave the front door open instead of using AC for a lot of spring or fall. Totally forgot about it because of so much shit going on. It's full size too, replace the like 6' long glass with one piece screen

anime graf stancil 🛰️🪐

@DemonSixOne @skylar @EdBoatConnoisseur whatever you do, dont tell like 20+ people they can stay at your house and only have 3 bedrooms and a basement with a bed. it all went smoothly but there was people fucking everywhere in my house bro. going to piss or get a beer in the middle of the night was like trying to avoid landmines

Radians

@graf @skylar @EdBoatConnoisseur little known fact but the most comfy place in grafhouse is right in front of the washing machine.

Replying to @DemonSixOne@poa.st

anime graf stancil 🛰️🪐